ARN Trading Ltd t/a AHR International
Tel +44 (0)1727 738430
Fax +44 (0)1727 899394
AS9120 & ISO9001 Approved

Andrews bearing part number system

PrefixSuffixDefinition
.AVARIATIONS .
.BBANDS.
.CO5DEGREE OF PRECISION.
.CO8DEGREE OF PRECISION.
.CPCENTER PLATE.
.DDICRONITE FILM.
.EELECTROFILM.
.GSPECIAL GREASE.
.HGREEN RINGS AND/OR RETAINER BLANKS.
.JPRESS STEEL RETAINER.
.KRETAINER ONLY.
.LPHENOLIC RETAINER.
.LBLARGE BORE.
.MMACHINE BRASS OR BRONZE RETAINERS.
.M2TYPE OF STEEL.
.M50TYPE OF STEEL.
.NNYLON RETAINER.
.PLESS ONE RACE.
.QSPECIAL MATERIAL.
.RMACHINED STEEL RETAINER.
.SSEATS (SELF-ALIGNING) .
.SBSMALL BORE.
.SPSPECIAL TOLERANCE.
.SSSTAINLESS STEEL.
.TMACHINED STAINLESS STEEL RETAINER.
.UPLATING.
.VSTAINLESS STEEL BALLS.
.WWASHER (SELF-ALIGNING) .
.XRACE ONLY.
B.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, OUT-SIDE BANDED, GROOVED RACES, NO RETAINER, FULL COMPLEMENT BALLS, HEAVY.
D.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION, BALL THRUST BEARING, OUT-SIDE BANDED, GROOVED RACES, NO RETAINER, FULL COMPLEMENT BALLS, MEDIUM.
DL.METRIC DIMENSIONS, FLAT SEAT, SINGLE DIRECTION, BALL THRUST BEARING, THREE PIECE WITH BALL RETAINER, GROOVED RACES, LIGHT.
DM.METRIC DIMENSIONS, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING. THREE PIECE WITH BALL RETAINER, GROOVED RACES, MEDIUM.
EW.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH MACHINED BRASS OR BRONZE RETAINER, FLAT RACES, LIGHT.
FT.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH MACHINED BRASS OR BRONZE RETAINER, FLAT RACES, MEDIUM.
FT-O.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH MACHINED BRASS OR BRONZE RETAINER, FLAT RACES, EXTRA LIGHT (SMALL SIZES) .
GT.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH PRESSED STEEL RETAINER, GROOVED RACES, LIGHT.
HW.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH BALL RETAINER, GROOVED RACES, HEAVY.
MW.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH BALL RETAINER, GROOVED RACES, MEDIUM.
TB.TREADLE ROLL BALL BEARING.
W.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH BALL RETAINER, GROOVED RACES, LIGHT.
WA.INCH DIMENSION, HARDENED AND GROUND STEEL THRUST WASHERS.
XW.INCH DIMENSION, FLAT SEAT, SINGLE DIRECTION BALL THRUST BEARING, THREE PIECE WITH BALL RETAINER, GROOVED RACES, EXTRA LIGHT (LARGE SIZES).


SPECIAL BEARING NOMENCLATURE

A special bearing is represented by either two or three numbers, a letter or group of letters, and two numbers.

EXAMPLE: OOOXOO

The first group of numbers can be read in inches with a decimal point before the last number, and represents any bore size within that tenth of an inch. The letter or group of letters further describe the bearing according to the code listed below. The last two numbers are sequential numbers used to designate a difference between other special bearings with the same numbering and lettering description.

XGrooved bearing
P3 piece bearing w/ flat race
YBanded
JPress steel retainer
WWasher
WXGrooved washer
NNylon retainer
ZInside banded (end thrust)
MBronze retainer
SStainless steel
RMachined steel retainer
RRRadial roller
RRTRadial roller and thrust combination
RTRoller thrust
BRRadial ball
RJJournal roller bearing
RTWRoller thrust w/ self aligning washer
CSleeves

Contact us now and let us show you exactly what we can do for you.

ŠARN Trading Ltd t/a AHR International 2010 All rights reserved